On this project we installed modern LED under cabinet lighting, recessed LED wafer lights and power for a swim spa as well as a hot tub.

We had the pleasure to work on a kitchen remodel in Elm Grove, WI. We installed energy efficient LED wafer lights, added outlets and more!

In this basement remodel not only did Warder Electric do a complete design, gut, and rewire but we also made the custom black walnut bar tops as well. Then, we installed color changing LED tape light underneath the bar to light the glasses and beverages quite nicely.

For this basement, Warder Electric was tasked with wiring energy saving lighting, switches and outlets per code.
Smoke detectors, vanity lights and GFI protected outlets were added, in addition to LED dimmers and a ceiling fan.
If you have a new renovation or an existing basement, Warder Electric can help with your electrical needs.

• Boat Lifts
• Heaters
• Air Compressors
• Welders
• Vehicle Lifts

Installing a hot tub, spa or jacuzzi can be an exciting but challenging project. Before installation, you need to consider both your local building codes and the electrical requirements of the unit. Unless you’re installing a replacement spa at a prepared site, you may need need to add a dedicated circuit to your electrical panel, with a GFCI-protected outlet or subpanel located near the new spa.

Warder Electric has the know-how to wire your new hot tub or spa.  Once completed, we will test your new tub to make sure it is safe and operational before you ever step in it.

The duration and cost of your installation will vary depending on the location of your new spa and how difficult it is to set up the new circuit. Warder Electric will give you a detailed estimate after looking at your electrical panel and considering the specifications of your installation.